Phillips 66 Type M Aviation Oil 20w-50

Phillips 66 Type M (Multi-grade) 20w-50 Aviation Break-in Engine Oil

Phillips 66 Type M Aviation Oil 20W-50, is an ashless, non-dispersant, multi-grade engine oil recommended for use in aircraft piston engines where the operator prefers a mineral oil-based engine oil that does not contain dispersant additives. It provides easier starting and quicker oil circulation at low temperatures compared with single-grade mineral oils, while maintaining high film strength at high temperatures and under high loads for protection against wear and piston scuffing.

Phillips 66 Type M Aviation Oil 20W-50, typically is used as break-in oil for newly overhauled engines where all-mineral type oils are recommended. The multigrade formulation helps reduce cylinder glazing tendency during break-in. Break-in normally is accomplished in less than 25 hours of engine operation.

Phillips 66 Type M Aviation Oil 20W-50 Benefits

• Easier starting and quicker oil circulation at low temperatures compared with single-grade oils
• High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures
• Reduces cylinder glazing tendency during break-in, compared with single-grade oils

Phillips 66 Type M Aviation Oil 20W-50 Application

• Aircraft piston engines where the operator prefers a nondispersant engine oil
• Break-in oil for newly overhauled aircraft engines