Phillips 66 Ecoterra Hydraulic Oil 68 | 5 Gallon Pail

Phillips 66 Ecoterra Hydraulic Oil 68, 5 gallon pail is a high-quality, zinc-free antiwear hydraulic oil specifically developed for use in industrial and mobile equipment operating in environmentally sensitive areas. It is specially formulated for reduced environmental impact in case of leaks or spills. Phillips 66 Ecoterra Hydraulic Oil 68, 5 gallon pail is nontoxic to fish and aquatic species as determined by OECD Test Method 203 1-12, and is classified as inherently biodegradable by the OECD Test Method 301B. It passes the visual no sheen requirements of the U.S. EPA Static Sheen Test. It also has the following benefits:

• Nontoxic to aquatic organisms
• Inherently biodegradable
• Does not contain zinc or other heavy metals
• Excellent wear protection for hydraulic pumps and motors
• Excellent oxidation resistance and thermal stability
• Protects against rust and corrosion
• Excellent water-separating properties
• Good foam resistance
• Good low-temperature properties for cold start-ups
• Lower-cost alternative to synthetic biodegradable hydraulic fluids

Application

• Hydraulic equipment used in environmentally sensitive areas, such as national parks, wildlife refuges, ski resorts and other recreational areas
• Hydraulic equipment in amusement parks and zoos
• Hydraulic jacks and other equipment in machine shops
• Oil drilling rigs and offshore platforms
• Chain drives
• Electric motor bearings
• Service station lifts
• Hydraulic systems where the equipment manufacturer specifies an ashless, zinc-free antiwear hydraulic oil

Phillips 66 Ecoterra Hydraulic Oil 68 meets the following requirements:

• Bosch Rexroth RE 90 220
• Denison Hydraulics HF-0
• Denison Hydraulics HF-1
• Denison Hydraulics HF-2
• DIN 51524 Part 2, Antiwear Hydraulic Oils, Type HLP
• German Steel Industry SEB 181222
• ISO 11158:1997, Family H (Hydraulic Systems), Type HM
• U.S. EPA/U.S. Coast Guard Static Sheen Test, Federal Register Vol. 58, No. 41
• U.S. Steel 127
• Vickers (Eaton) M-2950-S
• Vickers (Eaton) I-286-S

NOTE: Phillips 66 Ecoterra Hydraulic Oil 68 is not compatible with zinc-containing hydraulic oils, and may cause residue, gelling or filter plugging if mixed with such fluids. Mixing the two products will lessen the environmental benefits normally gained by using Phillips 66 Ecoterra Hydraulic Oil 68.