When considering Film Type, you are determining the film or coating's consistency after it is fully cured
Color refers to what the film looks like after it has been deposited onto the substrate and has fully cured
It may not be representative of whhat the coating looks like in the containerThis is the backbone of the system—a foundational layer that forms the main film, binding additives and ingredients to ensure adhesion and protection of the coated surface
Protection times are based on proper surface preparation and proper applied thickness
MORE FILTERS 
Not sure what something means? Check out our Coatings Glossary
THE RIGHT COATING FOR YOU
COATINGS GLOSSARY
Back to Top
CORE COMPONENTS
- Coating Base: The Primary film-forming material in a coating; determines protection type and performance.
- Additives: Extra ingrediens that improve corrosion resistance, UV protection, adhesion, or flexibility.
- Carrier (Solvent/Water): The liquid used to apply the coating; evaporates as the coating cures.
TYPES OF COATINGS (BY BASE)
- Wax: Long-term rust protection (months-years), excellent for shipping/storage in marine or high-moisture environments. Difficult to remove.
- Oil: Short-medium term protection (weeks-months). Displaces moisture after machining/washing. Easily removed with degreaser.
- Asphalt: Durable, water-resistant; used on undercarriages, tanks, pipes. 1-3 year protection. Not removable
- Resinous (Paint): Film-forming protective paint (acrylic, alkyd). Lasts 2-5 years. Ideal for steel, trailers, and chassis. Not removable
- Rubberized: Flexible and sound-deadening. used on underbodies, bed liners, and trailer floors. Lasts 3+ years. Not removable.
USE CONDITIONS
- Indoor Storage: Protected from weather: low corrosion risk.
- Outdoor Storage: Exposed to elements; needs more robust coating.
PROPERTIES
- VOC (Volatile Organic Compounds): Chemicals that evaporate easily: low-VOC = better for health/environment.
- Dry Time: Time until surface feels dry; allows recoating or handling.
- Cure Time: Time until coating reaches full durability/protection.
FINISH TYPES
- Matte (0—10%): Non-reflective; hides surface flaws.
- Semi-Gloss (10—70%): Balanced shine; moderate flaw visibility.
- Glossy (70—85%) / High Gloss (85—100%): Reflective, shows imperfections: requires smooth prep.
- Textured: Adds tactile/visual texture for appearance or function,
- Sheen: General term for light reflectivity level.
- (Note: Coating color in the container may differ once dry or cured.)
APPLICATION SURFACES
- Metal/Steel: Needs protection from rust. Different metals have different corrosion resistance.
- Wood: Needs sealing from water/lJV; prolongs life and prevents warping/rot.
- Plastic: Optional: used where abrasion or environmental resistance is needed.
APPLICATION METHODS
- Spray: Most efficient for even coating. Recommended.
- Brush/Roll: Manual method for smaller jobs or detail work.
- Dip: Submerging part in coating; used less frequently.
- Flow coating: Coating material is poured or continuously flowed over a surface.
SPRAY EQUIPMENT TYPES
- Airless: High-pressure for thick coatings, fast coverage,
- Conventional: Fine finish using compressed air.
- Air-Assisted Airless: Balanced finish and speed.
- HVLP: High control, minimal waste, Ideal for detail or indoor work.
