Castrol EDGE Euro Car 0W-30 LL Motor Oil
Full Synthetic SAE 0W-30 European Motor Oil for Gasoline and Diesel Engines
Castrol EDGE Euro Car 0W-30 LL is an advanced full synthetic motor oil formulated for European gasoline and diesel vehicles that require an SAE 0W-30 lubricant meeting specific European manufacturer and industry standards.
European automakers often establish their own lubricant requirements for wear protection, viscosity control, deposit management, thermal stability, and other performance characteristics. Castrol EDGE 0W-30 LL is designed for modern engines where the manufacturer recommends ACEA C3, ACEA A3/B4, or an earlier compatible 0W-30 specification.
The formulation is designed to maintain viscosity and thermal stability throughout the drain interval while helping reduce friction, wear, and engine deposits. It also provides low-temperature performance for vehicles that require a 0W-30 viscosity grade.
Key Benefits
- Advanced full synthetic SAE 0W-30 motor oil
- Suitable for compatible European gasoline and diesel engines
- Designed for operation under high pressure and temperature
- Helps protect critical engine components from wear
- Helps reduce friction across a range of engine speeds and conditions
- Provides thermal stability and viscosity control
- Helps limit engine deposit formation
- Supports low-temperature performance
- Approved for several BMW, Mercedes-Benz, Porsche, and Volkswagen specifications
Applications
Castrol EDGE Euro Car 0W-30 LL is suitable for gasoline and diesel passenger vehicles where the manufacturer recommends an SAE 0W-30 lubricant meeting ACEA C3, ACEA A3/B4, or another specification listed by Castrol.
Always confirm the required viscosity grade and manufacturer specification in the vehicle owner's manual before use. European vehicles can require highly specific lubricant approvals, so matching the correct OEM specification is more important than choosing oil based on viscosity alone.
Approved Specifications
- ACEA: C3
- BMW: Longlife-04
- Mercedes-Benz: MB-Approval 229.31
- Mercedes-Benz: MB-Approval 229.51
- Porsche: C30
- Volkswagen: VW 504 00
- Volkswagen: VW 507 00
Recommended Specifications
- ACEA: A3/B4
- API: CF
- BMW: Longlife-01
- BMW: Longlife-01 FE
- Chrysler: MS-6395
- FIAT: 9.55535-CR1
- Mercedes-Benz: MB 229.3
- Mercedes-Benz: MB 229.5
- Mercedes-Benz: MB 229.52
- Volkswagen: VW 502 00
- Volkswagen: VW 505 00
- Volvo: VCC95200356
- Volvo: VCC95200377
The distinction between approved and recommended specifications should be maintained when evaluating compatibility.
Typical Characteristics
- SAE Viscosity Grade: 0W-30
- Density at 15°C: 0.843 g/mL
- Kinematic Viscosity at 40°C: 61 mm²/s
- Kinematic Viscosity at 100°C: 12.3 mm²/s
- Viscosity Index: 205
- CCS Viscosity at -35°C: 5,900 mPa·s
- Pour Point: -48°C
- Flash Point, PMCC: 196°C
- Sulfated Ash: 0.80% by weight
Typical values are provided as a guide and may vary within normal manufacturing tolerances.
Why European Oil Specifications Matter
European manufacturers frequently require engine oils to meet specific performance standards beyond the SAE viscosity grade. Two oils labeled 0W-30 may not carry the same BMW, Mercedes-Benz, Porsche, Volkswagen, or ACEA approvals.
Castrol EDGE 0W-30 LL carries BMW Longlife-04, MB-Approval 229.31/229.51, Porsche C30, and VW 504 00/507 00 approvals. Buyers should match these specifications to the vehicle manufacturer's requirements before selecting an oil.
Storage
Store Castrol EDGE 0W-30 LL in its container and protect it from direct sunlight. Follow the current Safety Data Sheet for additional storage, handling, and disposal information.
Frequently Asked Questions
Is Castrol EDGE Euro Car 0W-30 LL full synthetic?
Yes. Castrol EDGE Euro Car 0W-30 LL is an advanced full synthetic motor oil formulated for compatible European gasoline and diesel vehicles.
What vehicles use Castrol EDGE 0W-30 LL?
It is intended for vehicles requiring an SAE 0W-30 oil and one of the compatible ACEA or manufacturer specifications listed by Castrol. This includes certain BMW, Mercedes-Benz, Porsche, Volkswagen, Volvo, Fiat, and other applications. Always verify the exact requirement in the owner's manual.
Is Castrol EDGE 0W-30 LL approved for BMW Longlife-04?
Yes. BMW Longlife-04 is listed as an approved specification on the Castrol product data sheet.
Does Castrol EDGE 0W-30 LL meet Mercedes-Benz specifications?
Castrol lists MB-Approval 229.31 and 229.51 as approved specifications. It also recommends the product for applications requiring MB 229.3, 229.5, and 229.52.
Is Castrol EDGE 0W-30 LL approved for VW 504 00 and VW 507 00?
Yes. VW 504 00 and VW 507 00 are listed among the product's approved specifications.
Is Castrol EDGE 0W-30 LL Porsche C30 approved?
Yes. Porsche C30 is listed as an approved specification.
Can Castrol EDGE 0W-30 LL be used in diesel engines?
Yes. Castrol identifies this product as suitable for gasoline and diesel cars where the manufacturer recommends a compatible SAE 0W-30 lubricant and applicable specification.
Does Castrol EDGE 0W-30 LL meet ACEA C3?
Yes. ACEA C3 is listed as an approved specification. Castrol also recommends this oil for applications requiring ACEA A3/B4.
What is the viscosity of Castrol EDGE 0W-30 LL?
Its typical kinematic viscosity is 61 mm²/s at 40°C and 12.3 mm²/s at 100°C. The viscosity index is 205.
What is the pour point of Castrol EDGE 0W-30 LL?
The typical pour point is -48°C according to the Castrol product data sheet.
Can I use Castrol EDGE 0W-30 LL instead of another 0W-30 oil?
Not automatically. European vehicles often require specific manufacturer approvals in addition to the SAE 0W-30 viscosity grade. Confirm that the oil carries the specification required by your vehicle before substituting products.
Product Videos
