Tectyl 714

Tectyl 714 Quick-Drying and Low Viscosity, Solvent-Free Steel Mill Light Oil Corrosion Preventive Compound Formulated with a High Flash Point of 275F°

Tectyl 714 is a premium solvent-free, high flash, corrosion inhibitor compound designed to deliver powerful corrosion protection for both ferrous (iron-containing)/non-ferrous (no-iron) metal substrates.
This high-quality thin film rust preventive provides effective protection for steel tubing and sheets during in-plant processing, transit, and storage as well as granting a suitable cost-effective solution for short-term protection for various metal components like moving and spare parts.

This solvent-free rust preventive is formulated specifically with a high flash point of 275F°, minimizing overall risk of sparks from high-temperature equipment or machinery like industrial steel mills and greatly enhancing working time in elevated temperature environments.
Tectyl 714 is a low viscosity corrosion preventive oil that simplifies application via brush, dip, or spray, working exceptionally well to coat surfaces containing more complex shapes as well as penetrate deep within the crevices of the metallic equipment.

This quick-drying rust preventive film will ultimately cure to form a very thin, transparent, and semi-oily film that leaves a slight non-discernable sheen that reflects light to provide a smooth and pleasant surface appearance.
Count on Tectyl 714 to deliver economical and convenient protection from corrosion for your prized metallic machinery and component.

Product Uses:

• Transparent, Solvent-Free, Light Oil Corrosion Preventive intended for the protection of ferrous/non-ferrous metals as well as steel tubing, sheets, coils, bars, and wire during in-plant processing, transit, and storage.
• High Flash point minimizes the risk of flammability and sparks during high temperature machinery use.
• Significantly low viscosity makes it much easier to apply product via brush, spray, or dip onto metal surfaces with relatively complex shapes.
• Leaves a thin and light, oily protective barrier.
• Can provide up to 1 year of indoor or undercover protection on metal substrates at the recommended dry film thickness.
• NOT recommended for outdoor protection.

Product Performance:

• When applied at the recommended wet film thickness of 0.6 mils over the surface profile, it will deposit the recommended dry film thickness (DFT) of 0.3 mils.
• Covers 6,600 square ft. per gallon when applied at the recommended film thickness.

Application Equipment Recommendations: 

• Can be applied via spray, brush, dip, or roller.
• Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
• Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.007" to .009" tip orifice size)
• High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
• Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
• High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft. 

Identification & Classification Codes/Numbers:

• Export Control Classification Number (ECCN):
• EAR99
• Schedule B:
• 3911.90.00.00

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.