NOX-RUST 1150

NOX-RUST 1150 Transparent, Non-Slick, 140°F Minimum Hot Application Grease Corrosion Preventive Compound and Preservative for

NOX-RUST 1150 is a grease-type, 140-150°F minimum hot application corrosion preventive compound that provides remarkable protection and preservation for both ferrous (iron-containing) and non-ferrous (no-iron) metal parts and machinery from atmospheric corrosion in various.
This high-quality, rust preventive when in its molten state (140-150°F) delivers enhanced adhesion, improved penetration for reaching hard-to-reach crevices on metal surfaces, and provides a robust film that serves as an effective barrier against water and dirt.

With less than 1.00 (lbs/gal) of Volatile Organic Compounds (VOC), this premium hot application corrosion inhibitor compound presents a thin, transparent, firm, and grease-like film that will strongly cling to metal surfaces and safeguard metal components.
A thixotropic rust preventive that sets up quickly, softening and flowing smoothly with added shear stress (stirring), providing self-healing properties to the coating.

NOX-RUST 1150 will effectively combat corrosion providing durable and long-lasting protection that keeps your equipment in optimal condition, even in the most harsh and challenging environments.

Product Uses:

• Blue and Transparent, 140-150°F Hot Application, Corrosion Preventive Compound protects ferrous/non-ferrous (iron-containing/no-iron) metals from corrosion in the presence of harsh environments and atmospheric corrosive conditions.
• Formulated with less than 1.00 (lbs/gal) Volatile Organic Compounds (VOC) for minimal environmental impact.
• Provides protection and preserves unpainted machinery, equipment, and spare metal parts by delivering long-term indoor storage protection, and 3-5 years of covered outdoor storage.
• Protects during storage, whether indoors or outdoors, and during domestic or international shipping.

 Product Performance:

• When applied at the recommended wet film thickness over the surface profile, it will deposit the recommended dry film thickness of 4 mils.
• Covers 400 square ft. per gallon when applied at the recommended film thickness.
• Can provide up to 1 year of outdoor protection and 5-10 years of indoor protection on metal substrates at the recommended dry film thickness (DFT).
• Melting Point with a minimum of 140-150°F and a Flash Point of 250°F.
• Dip Application 150°F maximum.

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.