NOX-RUST 502-DLS Class 1

NOX-RUST 502-DLS Class 1 Translucent Cold-Application Corrosion Preventive Compound QPL Approved Mil Spec MIL-PRF-16173E Grade 2, Class I

NOX-RUST 502-DLS (Class 1 is a Qualified Product Listed (QPL) for Govt Designation MIL-PRF-16173E; Grade 2, Class I formulated to also fulfill the requirements of MIL-PRF-1713E Grade 2, Class I and MIL-P-116J, Type P-2 Specifications.
Contrary to Class II, Class I indicates this product is higher in Volatile Organic Content/Compounds (VOC), exceeding 2.8 lbs. per gallon (340 grams/liter).

NOX-RUST 502-DLS Class 1 is a solvent-based, semi-firm, grease-like, wax corrosion preventive compound designed to protect various ferrous (contains iron) and non-ferrous (no iron) metal/steel surfaces like installed gearboxes from corrosion without the need for removal.
NOX-RUST 502-DLS Class 1 will cure to a translucent, amber-colored, soft wax film that is completely compatible with lubricating oils, eliminating the overall necessity for removal in some cases.

NOX-RUST 502-DLS Class 1 is a excellent general-purpose rust preventitive to protect manufactured cast and forged steel roles used in various rolling industries. The choice for high-quality and reliable corrosion prevention for a wide range of applications in storage, machinery protection, and domestic or international shipping.

Product Uses

• Translucent, Amber-Colored, Corrosion Preventive Coating recommended for corrosion protection during extended undercover protection of internal or external machinery surfaces like steel transportation parts/components during storage and domestic/international shipping.
• Protects highly polished cold rolled steel and paper calendaring mill rolls during shipping.
• The translucent film permits easy visual inspection of mill roll surfaces for hardness and surface imperfections prior to shipment.
• Serves as an effective edge coating for steel coil and sheet stock during storage.
• Class I Volatile Organic Content/Compounds (VOC) exceeds 2.8 lbs. per gallon (340 grams/liter).
• Removal is possible with mineral spirits (or another similar petrolatum solvent), hot alkaline wash, or low-pressure steam.

Product Performance:

• When applied at the recommended wet film thickness (WFT) of 2-3 mils over the surface profile, it will deposit the recommended dry film thickness (DFT) of 0.86 mils.
• Cured in 30-45 minutes.
• Covers 850 square ft. per gallon when applied at the recommended film thickness.
• Can provide up to 1 year of outdoor protection (covered) and 5 years of indoor protection on metal substrates at the recommended dry film thickness.

Application Equipment Recommendations: 

• Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
• Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.013" to .017" tip orifice size)
• High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
• Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
• High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft.
• Can be brush or dip applied. 

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.