NOX-RUST 507

NOX-RUST 507 Tan-Opaque, Non-Slick, 180°F Minimum Hot Application Wax Corrosion Preventive Compound QPL Approved MIL-C-11796C, Classes 1 and 1A

NOX-RUST 507 is a hot application corrosion preventive compound and is a Qualified Products Listed (QPL) for Govt. Designation MIL-C-11796C, Classes 1 and 1A.
This specification covers a suitably formulated petrolatum-base, corrosion preventive compound with Class 1 specifying a ‘hard-film’ compound and Class 1A, a ‘non-slick, hard-film’ compound.

NOX-RUST 507 is a grease-type, 180°F minimum hot application, wax corrosion preventive compound that provides remarkable protection for both ferrous (iron-containing) and non-ferrous (no-iron) metals from corrosion in environments with high humidity or salt air, which is when salt particles are carried into the atmosphere by ocean waves and winds.
This high-quality, wax corrosion preventive when in its molten state (170F-200F) delivers enhanced adhesion, improved penetration for reaching hard-to-reach crevices on metal surfaces, and provides a firm film effective barrier against atmospheric corrosion.

Free of Volatile Organic Compounds (VOC), this premium hot application corrosion inhibitor compound presents a thin, tan, firm, and non-slick, wax-like film that will not oxidize when exposed to moisture or oxygen in the air.
NOX-RUST 507 will effectively combat corrosion providing durable and long-lasting protection that keeps your equipment in optimal condition, even in the most harsh and challenging environments.

Product Uses

• Amber and Opaque, 150°F-200°F Hot Application, Corrosion Preventive Compound protects ferrous/non-ferrous (iron-containing/no-iron) metals for highly machined or polished parts from corrosion in the presence of high temperature environments and atmospheric corrosive conditions.
• Formulated to fulfill the requirements of Qualified Products Listed (QPL) for Govt. designation MIL-C-11796C, Class 1 and Class 1A.
• Formulated with ZERO Volatile Organic Compounds (VOC) for minimal environmental impact.
• Wax-Like film will not oxidize.
• Can provide protection of packaged/unpackaged small metal parts, long-term indoor storage protection of highly finished surfaces, and unshielded outdoor storage of gun tubes, etc.
• Protects ballast tanks and void spaces by the military on Naval Shapes and submarines.
• Protects and lubricates wire rope used in the marine, mining, logging, oil, oil, gas, and ski lift industries.
• Excellent for lubricating stranding wires at a strander in the fabrication of wire rope and cable. Product is heated to 175F-200F and pumped over stranding wires just prior to entering the forming die on the strander.
• Can be applied for the protection of elevator and suspension bridge cables.

Product Performance:

• When applied at the recommended wet film thickness of 1-2 mils over the surface profile, it will deposit the recommended dry film thickness of 1.5 mils.
• Covers 7-15 square ft. per pound (lbs.) when applied at the recommended film thickness.
• Can provide up to 1 year of outdoor protection and 5-10 years of indoor protection on metal substrates at the recommended dry film thickness (DFT).
• High Temperature Flow Point with a minimum of 150°F and a Melting Point of 170°F.
• Dip Application 180°F maximum.

Application Equipment Recommendations: 

• Pumps with ratios of 30:1 or greater are advised for efficient use of container content.
• Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.019" to .023" tip orifice size)
• High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
• Low Ratio pumps (30:1): operate through 100 ft. of 1/2 inch & 50 ft. of 3/8 inch hose for a max of 150 ft.
• High Ratio pumps(>30:1): operate through 200 ft. of 1/2 inch & 50 ft. of 3/8 inch hose for a max of 250 ft.
• Can be applied in the hot molten/liquid state by hot airless spray or dip.
• Can be applied at warm, ambient temperatures by brush or swab. 

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.