Phillips 66 Syndustrial Rotary Compressor Oil 32/46

Phillips 66 Syndustrial Rotary Compressor PAG/Ester Synthetic ISO VG 32/46

Phillips 66 Syndustrial Rotary Compressor Oil 32/46 is a premium quality, readily biodegradable synthetic lubricant developed for use in centrifugal and rotary air compressors. It is particularly recommended for use in applications where operating conditions are unfavorable or too severe for conventional mineral oil-based compressor oils. Phillips 66 Syndustrial Rotary Compressor Oil is formulated with a blend of synthetic polyalkylene glycol (PAG) and synthetic ester base oils and carefully selected additives. It has outstanding oxidation resistance and thermal stability at high temperatures to minimize deposit formation and provide long service life.

Phillips 66 Syndustrial Rotary Compressor Oil 32/46 has the following benefits:

• Outstanding oxidation resistance and thermal stability at high temperatures
• High viscosity index and very low pour point for use over a wide temperature range
• Excellent cooling and heat transfer properties
• Excellent deposit control
• High film strength for wear protection
• Low volatility for lower oil consumption and less makeup oil
• Protects against rust and corrosion
• Extended service intervals compared with mineral oil-based lubricants
• Readily biodegradable for reduced environmental impact in case of leaks or spills
• Compatible with commonly used seals, gaskets and hoses

Application

• Centrifugal air compressors and oil-flooded rotary screw, rotary lobe and rotary vane air compressors where the manufacturer specifies a synthetic polyglycol/ester lubricant
• Drop-in replacement for OEM-branded polyglycol-based compressor oils
• Note: Phillips 66 Syndustrial Rotary Compressor Oil 32/46 is not compatible with petroleum compressor oils and should not be mixed with such products. When converting from mineral oil to Syndustrial Rotary Compressor Oil, a complete flush, drain and refill should be performed.
• Note: Phillips 66 Syndustrial Rotary Compressor Oil 32/46 is compatible with neoprene, silicone rubber, torlon, vespal and viton, as well as epoxy paints. It is not compatible with oil-based paints or with solvents, such as diesel fuel, kerosene, heptane, methanol, ethylene glycol or triethanolamine.