Phillips 66 Syndustrial Rotary Compressor Oil 32/46, 55 gallon drum is a premium quality, readily biodegradable synthetic lubricant developed for use in centrifugal and rotary air compressors. It is particularly recommended for use in applications where operating conditions are unfavorable or too severe for conventional mineral oil-based compressor oils. Phillips 66 Syndustrial Rotary Compressor Oil 32/46, 55 gallon drum also has the following benefits:
Outstanding oxidation resistance and thermal stability at high temperatures
High viscosity index and very low pour point for use over a wide temperature range
Excellent cooling and heat transfer properties
Excellent deposit control
High film strength for wear protection
Low volatility for lower oil consumption and less makeup oil
Protects against rust and corrosion
Extended service intervals compared with mineral oil-based lubricants
Readily biodegradable for reduced environmental impact in case of leaks or spills
Compatible with commonly used seals, gaskets and hoses
Centrifugal air compressors and oil-flooded rotary screw, rotary lobe and rotary vane air compressors where the manufacturer specifies a synthetic polyglycol/ester lubricant
Drop-in replacement for OEM-branded polyglycol-based compressor oils
Note: Phillips 66 Syndustrial Rotary Compressor Oil 32/46 is not compatible with petroleum compressor oils and should not be mixed with such products. When converting from mineral oil to Syndustrial Rotary Compressor Oil, a complete flush, drain and refill should be performed.
Note: Phillips 66 Syndustrial Rotary Compressor Oil 32/46 is compatible with neoprene, silicone rubber, torlon, vespal and viton, as well as epoxy paints. It is not compatible with oil-based paints or with solvents, such as diesel fuel, kerosene, heptane, methanol, ethylene glycol or triethanolamine.