Tectyl 2102 | 54 Gallon Drum

Tectyl 2102 | 54 Gallon Drum
461.00 LBS

Tectyl 2102, 54 Gal. drum, is a solvent-reduced, rubberized coating formulated to dry quickly, retain flexibility and provide a textured appearance. The film is black and extremely flexible. If necessary, this product may be top-coated with automotive-type finishes. 

Surface Preparation: The maximum performance of Tectyl 2102 can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95F (10-35C) at the time of product application. 

This product is formulated to be used as supplied. 

✓ - Ensure uniform consistency prior to use. 
✓ - Continued stirring is generally not required.
✓ - If product thickens, contact Daubert Chemical Company.*
✓ - Ambient/product temp at time of application: 50 - 95F.** 
✓ - This product can be airless spray applied. 


  • Coating can be removed with toluene or xylene, vapor degreasing, hot alkaline wash, or low pressure steam. 
  • This product can be removed from fabrics by normal dry cleaning procedures. 
  • Avoid the use of chlorinated or highly aromatic solvents when removing from painted surfaces, as these solvents may adversely affect paint. 


  • Store product at temperatures between 50-95F (10-35C). 
  • Mild agitation is recommended prior to use. 

CAUTION: Adequate ventilation is required for cure and to ensure against formation of a combustible liquid. The partially cured film should not be exposed to ignition sources such as flares, flames, sparks, excessive heat, or torches. Refer to Daubert's Safety Data Sheet for additional handling and first aid information. 

NOTE: The addition of any product over or under this coating is not recommended. The use of additional coatings could result in chemical incompatibility, thus adversely affecting the performance of this coating as stated in the lab data section. If a product other than Daubert Chemical Company's recommended product is required, written authorization must be obtained from Daubert Chemical Company, Inc. 

*This may occur due to cold storage or loss of solvent during use 
**Or, 10 - 35C according to Daubert Chemical Company recommendations.

National Stock Number (NSN): 8030-20-A03-8391


1 Review | Write a Review.

  • 5
    Best i have used

    Posted by jon on Aug 21 2018

    This is a superior product to others by far. If using the correct equipment you will be extremely happy

What is Rust (and how can you stop its reign of terror)?

Customers Also Viewed