Tectyl 7449

Tectyl 7449 Non-Flammable, White/Tan, Water-Based Corrosion Inhibiting Rustproofing Cavity Wax

Tectyl 7449 is a premium water-based, rustproofing cavity wax compound cutback with mineral spirits designed for protecting automobiles from internal damage due to corrosion or rust.
Non-flammable and contains miniscule VOC (Volatile Organic Compounds), ideal for applications requiring low toxicity and safer handling in higher temperatures for automotive primed and unprimed surfaces.

This rust-proofing compound has a thin gel, but low viscosity that allows for film build on vertical surfaces and for seam penetration (capillary action) into areas with metal-to-metal overlap.

Tectyl 7449 is usually spray applied using a wand or hose that allows the user to spray deep inside car doors, frames, and various other voids. Once cured, the white liquid dries to form a wax-like, tan film that will effectively repel water, can self-heal, all whist maintaining sufficient flexibility (resisting cracking and adhesion loss) in temperatures as low as -30 °C.

When applied as an undercoating or rustproofing compound, Tectyl 7449 premium corrosion preventive compound wax leaves behind a long-term protective film that provides outstanding rust protection for enclosed automobile body sections or transportation equipment.
Trust Tectyl 7449 water-based corrosion preventive compound to provide maximum defense wherever a water displacing, long term, inner body corrosion preventive is needed. 

Product Uses:

• White, Water-Based Corrosion Resistant Cavity Wax and Rustproofing Compound for quality protection of primed/unprimed automobile body surfaces, transportation equipment, and more.
• Superb corrosion preventative for new automobiles, trucks, and trailers.
• Effective protection of used transportation equipment with less than perfect substrates.

Product Performance:

• Firm wax-like film that will repel water, self-heal, and remain flexible (resisting cracking and adhesive loss) at low temperatures.
• Impervious to water 15 minutes after application.
• Proven to be freeze/thaw stable in regard to viscosity and performance

Application Equipment Recommendations: 

• Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
• This product should be applied at temperatures above 50°F to allow for proper film formation.

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.