Tectyl 894 Class II

Tectyl 894 Class II Heavy-Duty Water-Displacing & Lubricating Corrosion Preventive Compound QPL Approved Mil Spec MIL-PRF-16173E Grade 3, Class II

Tectyl 894 Class II is a Qualified Product Listed (QPL) for Govt Designation MIL-PRF-16173E; Class II, Grade 3 Certified Source, formulated to also fulfill the requirements of MIL-P-116J, Type P-3 Specifications.
Contrary to Class I, Class II indicates this product is lower in Volatile Organic Content/Compounds (VOC), not exceeding 2.8 lbs. per gallon (340 grams/liter).

Tectyl 894 Class II is a solvent-based, semi-firm, water-displacing corrosion preventive compound cutback with mineral spirits offering strong multi-purpose capabilities.
Designed to protect various ferrous (contains iron) and non-ferrous (no iron) metals where water or saline solutions must be displaced to prevent the formation of corrosion-promoting conditions.
Tectyl 894 Class II will cure to a soft and oily, translucent, brown rustproofing film.

Tectyl 894 Class II is a smart choice for reliable water-displacing corrosion prevention in a wide range of industrial applications like storage, machinery protection, and domestic/international shipping to effectively safeguard your assets and extend their lifespan in even the harshest environments.

Product Uses

• Translucent, Amber, Heavy-Duty Lubricating Corrosion Preventive Compound that penetrates surfaces, lubricates, and is recommended for strong corrosion protection for indoor/outdoor or covered/uncovered storage metal equipment or parts during shipment in a variety of industrial applications.
• Protects interior surfaces of machinery, instruments, and/or material under cover for limited periods.
• Protects critical bare steel or phosphated surfaces for extended periods when packaged with satisfactory barrier materials.
• Class II Volatile Organic Content/Compounds (VOC) not exceeding 2.8 lbs. per gallon (340 grams/liter).
• Removal is possible with mineral spirits (or another similar petrolatum solvent), hot alkaline wash, or low-pressure steam.

Product Performance:

• When applied at the recommended wet film thickness (WFT) of 1.5-2 mils over the surface profile, it will deposit the recommended dry film thickness (DFT) of 0.7-1.25 mils.
• Dry to touch in 4 hours, weather-resistant in 2 hours, and fully cured in 24 hours.
• Covers 1,215 square ft. per gallon when applied at the recommended film thickness.
• Can provide up to 2 months of outdoor protection and 2 years of indoor or undercover protection on metal substrates at the recommended dry film thickness.

Application Equipment Recommendations: 

• Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
• Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.011" to .017" tip orifice size)
• High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
• Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
• High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft.
• Can be brush or dip applied. 

Class II Identification & Classification Numbers/Codes:

• National Stock Numbers (NSN):
  • 8030-01-396-5734:55 Gallon Drum
  • 8030-01-347-0971: 5 Gallon Can
  • 8030-01-396-5748: 1 Gallon Can
  • 8030-01-396-5235: 1 Pint Can
• Export Control Classification Number (ECCN):
  • EAR99
• Commercial and Government Entity Code (CAGE CODE):
  • 0Y4S8
• Schedule B:
  • 3811.90.00.00

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.