Browse Equivalent and Related Products
Full Force Conventional Green 50/50 Antifreeze & Coolant
Ready-to-Use Low-Silicate Green Coolant for Older Cars, Trucks and Compatible Heavy-Duty Diesel Engines
Full Force Conventional Green Antifreeze & Coolant 50/50 is a ready-to-use, ethylene glycol-based coolant formulated for older passenger vehicles, light- and medium-duty trucks, and compatible heavy-duty diesel engines.
The low-silicate formulation is premixed with approximately 50% water, so no additional water is required before use. It provides year-round freeze, boilover, rust and corrosion protection for cooling systems designed for conventional green antifreeze.
With a complete cooling-system flush and fill and proper maintenance, Full Force Conventional Green can protect cooling-system metals for up to 2 years or 50,000 miles.
Key Features
- Ready-to-use 50/50 antifreeze and coolant
- Conventional green coolant technology
- Low-silicate formulation
- Ethylene glycol-based coolant
- No mixing or additional water required
- Rated freeze protection down to -34°F
- Boilover protection up to 265°F with a 15 psi pressure cap
- Helps protect cooling-system metals against rust and corrosion
- Compatible with conventional green antifreeze formulations
- Suitable for many older passenger cars and trucks
- Suitable for compatible heavy-duty diesel engines when the required SCA is added
- Meets or exceeds ASTM D3306
- Meets or exceeds ASTM D4985
- Meets ASTM D6210 requirements with the addition of supplemental coolant additive
Ready-to-Use 50/50 Antifreeze
This product is already diluted to the appropriate 50/50 concentration for normal use.
Do not add water.
Adding additional water would reduce the glycol concentration and change the coolant's freeze protection, boilover protection and corrosion-inhibitor concentration.
The 50/50 prediluted formulation is useful for:
- Complete cooling-system fills
- Coolant changes
- Compatible top-off applications
- Fleet maintenance
- Shops that want consistent premixed coolant concentration
Always follow the vehicle or equipment manufacturer's coolant specification and top-off instructions.
Freeze and Boilover Protection
For the 50/50 prediluted formulation, Full Force provides:
| Protection | 50/50 Prediluted |
|---|---|
| Freeze Protection | Down to -34°F (-36°C) |
| Boilover Protection* | Up to 265°F (129°C) |
*Boilover protection is based on a cooling system using a 15 psi pressure cap.
The manufacturer also lists a typical laboratory freezing point of approximately -36.2°F (-37.9°C) under ASTM D1177.
The -84°F freeze and 276°F boilover figures associated with Full Force Conventional Green apply to a 70/30 coolant-to-water mixture of the concentrate. They do not represent the protection level of the ready-to-use 50/50 product.
Conventional Green Low-Silicate Coolant
Full Force Conventional Green uses traditional low-silicate coolant technology intended primarily for cooling systems designed around conventional green antifreeze.
The manufacturer specifically identifies applications including:
- Chrysler vehicles manufactured before 2000
- Ford vehicles manufactured before 2002
- General Motors vehicles manufactured before 1995
Vehicle model, engine and cooling-system requirements can vary even within those ranges. Always confirm the required coolant chemistry in the owner's manual or service information.
Passenger Car and Light-Duty Applications
Full Force Conventional Green 50/50 can be used in compatible older:
- Passenger cars
- Pickup trucks
- Vans
- SUVs
- Light-duty trucks
- Medium-duty trucks
Use the product only where a conventional low-silicate green antifreeze meeting the applicable ASTM requirements is specified.
Heavy-Duty Diesel Applications
Full Force Conventional Green can also be used in compatible heavy-duty diesel cooling systems.
Heavy-duty applications require the appropriate Supplemental Coolant Additive (SCA) when ASTM D6210 performance is required.
SCAs replenish corrosion and cavitation protection needed in certain heavy-duty diesel cooling systems.
For heavy-duty applications:
- Follow the engine manufacturer's coolant requirements
- Add the required SCA according to the coolant and equipment instructions
- Maintain the correct SCA concentration during service
- Do not exceed a 60% coolant concentration when using the concentrate version
The 50/50 version is already within that concentration limit.
ASTM Specifications
Full Force Conventional Green Antifreeze & Coolant is recommended where the following specifications are required:
- ASTM D3306
- ASTM D4985
- ASTM D6210 with the addition of SCA
ASTM D3306 is commonly associated with automotive and light-duty engine coolant performance.
ASTM D4985 addresses low-silicate coolant performance for heavy-duty service.
ASTM D6210 includes additional heavy-duty diesel coolant requirements and requires the appropriate SCA treatment with this Full Force formulation.
Rust and Corrosion Protection
A cooling system contains several different metals that must be protected from corrosion.
Full Force Conventional Green is formulated to help protect cooling-system metals against rust and corrosion throughout the recommended service interval.
With a complete flush and fill and proper cooling-system maintenance, the manufacturer lists protection for up to:
2 years or 50,000 miles
Always follow the vehicle manufacturer's maintenance interval if it requires more frequent coolant service.
Compatibility with Conventional Green Antifreeze
Full Force Conventional Green is compatible with other conventional low-silicate green antifreeze formulations.
Compatibility does not mean that all coolant technologies are interchangeable.
Modern vehicles may require OAT, HOAT, phosphate-enhanced, silicate-enhanced or manufacturer-specific coolant chemistry. Mixing incompatible coolant technologies can change inhibitor performance and service life.
For a complete coolant replacement, use the coolant chemistry specified by the vehicle manufacturer.
Typical Physical Properties
| Property | Typical Value, 50/50 |
|---|---|
| Appearance / Color | Green |
| pH | 10.5 |
| Specific Gravity | 1.066 |
| Boiling Point, Unpressurized | 229°F (109.5°C) |
| Typical Freezing Point | -36.2°F (-37.9°C) |
| Rated Freeze Protection | -34°F (-36°C) |
| Rated Boilover Protection, 15 psi | 265°F (129°C) |
| Effect on Automotive Finish | No Effect |
| Total Water | 50 mass % |
| Ash Content | <2.5 mass % |
| Chloride | <25 ppm |
Typical properties are provided for reference and should not be treated as guaranteed batch specifications.
Storage
Full Force Conventional Green Antifreeze & Coolant can be stored in its original sealed container at ambient temperature.
The manufacturer lists a storage period of approximately 3 to 5 years when the container remains sealed, with only limited exposure to temperatures above 95°F.
The product should be agitated before use if it has been stored for an extended period.
Frequently Asked Questions
What is Full Force Conventional Green 50/50 Antifreeze?
It is a ready-to-use, low-silicate conventional green antifreeze and coolant designed primarily for older passenger vehicles, trucks and compatible heavy-duty diesel cooling systems.
Is Full Force Conventional Green 50/50 ready to use?
Yes. The product is already premixed with approximately 50% coolant and 50% water.
Do I add water to Full Force 50/50 coolant?
No. The 50/50 prediluted product is ready to use and should not be further diluted with water.
How cold does Full Force Conventional Green 50/50 protect?
The ready-to-use 50/50 formulation provides rated freeze protection down to -34°F (-36°C).
What is the boilover protection of Full Force 50/50?
With a 15 psi cooling-system pressure cap, the 50/50 mixture provides boilover protection up to approximately 265°F (129°C).
Why does the Full Force data sheet also show -84°F protection?
The -84°F figure applies to a 70/30 coolant-to-water mixture made using the concentrate product. It does not apply to the ready-to-use 50/50 formulation.
Is Full Force Conventional Green an ethylene glycol coolant?
Yes. The manufacturer identifies Full Force Conventional Green as an ethylene glycol-based antifreeze and coolant.
Is Full Force Conventional Green an OAT coolant?
No. It is a conventional low-silicate green coolant, not a modern extended-life OAT coolant.
What vehicles use conventional green antifreeze?
The manufacturer specifically identifies older Chrysler vehicles before 2000, Ford vehicles before 2002 and GM vehicles before 1995 among its applications. Always verify the actual coolant specification for the individual vehicle.
Can Full Force Conventional Green be used in newer vehicles?
Only if the vehicle manufacturer specifically permits conventional low-silicate green coolant. Many newer vehicles require different coolant chemistry.
Does Full Force meet ASTM D3306?
Yes. The manufacturer states that it meets or exceeds ASTM D3306.
Does Full Force meet ASTM D4985?
Yes. ASTM D4985 is listed among the supported performance specifications.
Does Full Force meet ASTM D6210?
It can meet ASTM D6210 requirements after the appropriate supplemental coolant additive is added.
What is an SCA?
SCA stands for Supplemental Coolant Additive. It replenishes corrosion, liner-cavitation and other protective additives required in certain heavy-duty diesel cooling systems.
Does Full Force 50/50 need SCA in a heavy-duty diesel engine?
When the application requires ASTM D6210 performance, the manufacturer specifies the addition of the appropriate SCA.
Can Full Force Conventional Green be mixed with other green antifreeze?
It is compatible with conventional low-silicate green antifreeze formulations. That does not mean it should automatically be mixed with every coolant color or coolant chemistry.
How long does Full Force Conventional Green last?
With a complete flush and fill and proper maintenance, the manufacturer lists cooling-system protection for up to 2 years or 50,000 miles.
Is Full Force Conventional Green good for topping off coolant?
It can be used for top-off where the existing cooling system uses a compatible conventional low-silicate green coolant. Verify the coolant specification before mixing.
What color is Full Force Conventional Antifreeze?
It is green.
How long can unopened Full Force antifreeze be stored?
The Product Data Sheet lists approximately 3 to 5 years in the original sealed container when stored appropriately.
Should I flush the cooling system before switching to Full Force Conventional Green?
A complete flush and fill is recommended when changing coolant types or when the condition of the existing coolant is uncertain. It also provides the basis for the manufacturer's stated 2-year/50,000-mile protection interval.
1 Review | Write a Review.
-
5 Good quality
Posted by Fox Water Service, Inc on Feb 17 2026
Good quality antifreeze at a reasonable price. Shipping cost can bring the value down some but will certainly purchase again.
