Gulf Compressor PG 32

Gulf Advanced Biodegradable Synthetic Compressor PG Lubricant ISO 32 Designed for Rotary Screw Air Compressors

Gulf Compressor PG 32 is a high-quality synthetic compressor oil based on combined synthetic base stocks polyglycol (PG), polyalkylene glycol (PAG), and ester technology designed for use in Rotary Screw Air (except breathing air) Compressors.

Gulf Compressor PG 32 is a premium synthetic compressor lubricant oil formulated to out-perform mineral-based oils with benefits such as a higher viscosity index providing reliable and remarkable performance all-season, prevents solidification, gelling, or thinning in extreme temperatures, as well as eliminating carbon, varnish, and sludge build-up normally associated with hydrocarbon oils allowing for cooler running.

This high-performing synthetic compressor fluid boasts superb biodegradable environmentally friendly characteristics, ensures protection against corrosion and rust in the most severe operating conditions, and possesses outstanding thermal and oxidation characteristics for extended drain intervals; typically, under normal operating conditions of 8000 hours.

It is strongly recommended that prior to installing Gulf Compressor PG in systems that have been running on mineral oil to thoroughly drain and flush as outlined by compressor manufacturer. 

Features & Benefits:

• Biodegradable oils allow breakdown without environmental harm.
• Virtually eliminates all carbon formation for overall cooler running.
• High viscosity index offers outstanding all-season performance.
• Incredible resistance to rust and oxidation.
• High flash point decreases flammability drastically.
• Exceptional thermal and oxidation properties for extended drain intervals.

Applications

• It is strongly recommended that prior to installing Gulf Compressor PG in systems that have been running on mineral oil to thoroughly drain and flush as outlined by compressor manufacturer. 
• Flooded rotary screw, lobe, and vane compressors.
• Some vacuum pumps
• Ingersoll-Rand and Sullair rotary compressors
• Sullair rotary compressors requiring Sullube 32 as factory fill.

Compatibilities

Following seal and elastomeric materials: Viton, High Nitrile, Buna N, Nylon, Delrin, PBT, Oil-Resistant Alkyd, and Teflon.