null

Tectyl 518

Tectyl 518
Tectyl

PRICE:
$46.00
SKU:
WEIGHT:
0.00 LBS


Tectyl 518 Translucent Calcium Sulfonate Corrosion Inhibiting Compound Meeting Mil Spec A-A-59295 Type I and II

Tectyl 518 is a premium corrosion inhibitor compound approved under military specifications MIL-C-0083933A and under MIL-C-62218A, Types I and II, A-A-59295, QPL Reference Numbers AR-18-85 and 2-7515, respectively. 

Tectyl 518 is a solvent base gelled calcium sulfonate corrosion preventive compound cutback with mineral spirits.
When applied as an undercoating or rustproofing compound, Tectyl 518 provides outstanding protection for transportation equipment.

In its uncured state, this thixotropic coating is gel-like and becomes more fluid with mixing and agitation allowing it to flow.
After drying, the wax-like film is translucent and semi-firm or more specifically, firmer than Vaseline but not hard like a candle.

Product Uses

  • Translucent Abrasive Resistant coating and rustproofing compound for quality protection of truck beverage bodies, military transportation equipment, and more.
  • Superb corrosion preventative for new automobiles, trucks, and trailers.
  • Effective protection of used transportation equipment with less than perfect substrates.
  • Can be applied to battery terminals for insulating processes.

Product Performance:

  • Firm wax-like film that will repel water, self-heal, and remain flexible at low temperatures.
  • When applied at the recommended wet film thickness of 12-14 mils over the surface profile, it will deposit the recommended dry film thickness of 5-6 mils.
  • Dry to touch in 2-4 hours, weather resistant after 4 hours, and fully cured after 24 hours.
  • Covers 135 square feet per gallon when applied at the recommended film thickness.
  • A dielectric strength of 800 volts per mil of coating allows application between dissimilar metals preventing galvanic corrosion between contacting metals.
  • Can provide up to 3 years of protection on both metal and wood substrates at the recommended film thickness.

Application Equipment Recommendations: 

  • Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
  • Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.017" to .025" tip orifice size)
  • High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
  • Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
  • High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft. 

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.

 

There aren't any reviews yet. Write a Review.

What is Rust (and how can you stop its reign of terror)?
Bizrate 2022 Platinum Six Time Winner

Safety Data Sheet
Product Data Sheet
GSA CID A-A-59295
Spray Equipment Recommendations
Tectyl MIL-Spec A-A-59295 Approved Corrosion Preventives

Due to these products being hazardous, an additional shipping charge of $25.00 is automatically added to smaller "Ground Shipments". If you can order any combination of products that makes your total cart weight over 150 lbs. (which is considered "Freight Shipment"), this additional fee is waived. This can equate to considerable savings on shipping.


Sunoco Race Fuels is offering a Free Drum Pump with the purchase of a 54 Gallon Drum of Sunoco E85-R 99 Octane Race Fuel.
To add the free drum pump, first add the '54 Gallon Drum' to the cart, then click the blue 'Add FREE Drum Pump' button.


By entering your amount in the “Quantity” field, the price will automatically reflect the bulk discount below.
// Sunoco Free Drum Pump GraphQL // Loop through products in the cart and use GraphQL to query sku