Mobil Velocite No 6

Mobil Velocite Oil No. 6

ISO VG 10 Spindle Oil for High-Speed Machine Tool Applications

Mobil Velocite Oil No. 6 is an ISO VG 10 spindle oil designed for high-speed machine tool bearings where fine clearances and proper oil flow are important. Also searched as Mobil Velocite No. 6 or Mobil Velocite Oil Number 6, this low-viscosity machine tool lubricant is part of the Mobil Velocite Oil Numbered Series.

Mobil Velocite No. 6 is commonly used in machine tools such as precision grinders, lathes, jig borers, and tracer mechanisms. This ISO VG 10 spindle oil helps support lubrication in close-tolerance areas while providing oxidation resistance, rust and corrosion protection, water separation, and foam control.

For shops maintaining precision equipment, Velocite Oil No. 6 is a useful option when the equipment manual specifies ISO VG 10 spindle oil, high-speed spindle oil, or a compatible light machine tool lubricant.

Key Benefits

• ISO VG 10 spindle oil for high-speed machine tools
• Designed for close-tolerance spindle bearing applications
• Suitable for selected low-pressure hydraulic and circulation systems when ISO VG 10 is required
• Helps reduce deposit formation through oxidation resistance
• Helps protect against rust and corrosion
• Separates readily from water to support reservoir maintenance
• Provides very good foam resistance
• Useful for precision machine tool lubrication where correct viscosity selection matters

Recommended Applications

This light spindle oil may be used in:

• High-speed spindle bearings
• Precision grinders
• Lathes
• Jig borers
• Tracer mechanisms
• Sleeve-type spindle bearings when ISO VG 10 is appropriate
• Low-pressure hydraulic systems requiring ISO VG 10
• Circulation systems requiring light machine oil
• Selected sensitive instruments where this viscosity is recommended

Always confirm lubricant selection with the equipment manufacturer’s service manual, viscosity requirements, and maintenance recommendations.

Typical Product Characteristics

• Product Type: Spindle and hydraulic oil
• ISO Viscosity Grade: ISO VG 10
• Kinematic Viscosity @ 40°C: 10.0 cSt
• Kinematic Viscosity @ 100°C: 2.62 cSt
• Total Acid Number: 0.06 mg KOH/g
• Copper Strip Corrosion, 3 hrs @ 100°C: 1A
• Rust Characteristics, Procedure A: Pass
• Pour Point: -15°C
• Flash Point: 180°C
• Density @ 15°C: 0.844 kg/L

Why Choose Mobil Velocite Oil No. 6

Mobil Velocite No. 6 is positioned for buyers who need an ISO VG 10 spindle oil for high-speed machine tool applications. It provides a practical balance of low-viscosity flow, oxidation resistance, rust protection, water separation, and foam control for selected precision lubrication needs.

Frequently Asked Questions

What is Mobil Velocite Oil No. 6 used for?
It is used for high-speed spindle bearings, machine tools, and selected low-pressure hydraulic or circulation systems where ISO VG 10 oil is recommended.

What viscosity is Mobil Velocite Oil No. 6?
Mobil Velocite Oil No. 6 is an ISO VG 10 oil with a typical viscosity of 10.0 cSt at 40°C.

Is Velocite 6 oil the same as Mobil Velocite Oil No. 6?
Yes. Velocite 6 oil, Mobil Velocite No. 6, Mobil Velocite Oil No. 6, and Mobil Velocite Oil Number 6 are common ways customers may refer to the same ISO VG 10 spindle oil. Always confirm the product number and ISO viscosity grade before purchase.

Is Mobil Velocite No. 6 a spindle oil?
Yes. It is part of the Mobil Velocite spindle oil series and is used in high-speed machine tool spindle applications.

Can Mobil Velocite Oil No. 6 be used as hydraulic oil?
It may be used in selected low-pressure hydraulic systems where ISO VG 10 viscosity is appropriate. Always check the equipment manufacturer’s fluid requirements.

What equipment commonly uses Velocite Oil No. 6?
Common uses include precision grinders, lathes, jig borers, tracer mechanisms, high-speed spindles, and selected circulation systems.