Undercoating In A Can, Black Wax Coating

I had a concern because I had some over spray after treating my 2014 GMC Pick-up. I was instructed by PSC that it should come off with a little mineral spirits. I ended up using odorless mineral spirits from my local hardware store and it worked perfect. Thank You PSC!

I had a concern because I had some over spray after treating my 2014 GMC Pick-up. I was instructed by PSC that it should come off with a little mineral spirits. I ended up using odorless mineral spirits from my local hardware store and it worked perfect. Thank You PSC!

I had a concern because I had some over spray after treating my 2014 GMC Pick-up. I was instructed by PSC that it should come off with a little mineral spirits. I ended up using odorless mineral spirits from my local hardware store and it worked perfect. Thank You PSC!

I had a concern because I had some over spray after treating my 2014 GMC Pick-up. I was instructed by PSC that it should come off with a little mineral spirits. I ended up using odorless mineral spirits from my local hardware store and it worked perfect. Thank You PSC!

I had a concern because I had some over spray after treating my 2014 GMC Pick-up. I was instructed by PSC that it should come off with a little mineral spirits. I ended up using odorless mineral spirits from my local hardware store and it worked perfect. Thank You PSC!

I had a concern because I had some over spray after treating my 2014 GMC Pick-up. I was instructed by PSC that it should come off with a little mineral spirits. I ended up using odorless mineral spirits from my local hardware store and it worked perfect. Thank You PSC!

I purchased the Undercoating in a can and spray gun kit to protect my pickup. Even with the material at 70degrees, it was very slow and difficult to get it from the 5 gallon pail into the 1liter bottle of the spray gun. I was able to warm the product to about 80 degrees and that helped a lot. Even warmer would be better. While using the 360 degree spray attachment the product was not spraying well at the 80 psi recommended air pressure but works much better at 100 psi. The product covered very well and did not drip at all. I used about 4 gallons to do the underbody, underbed, inside of doors, fenderwells, frame, and tailgate of a crewcab longbox truck. Overall it is a good product and I hope it protects as well as it should. I would recommend it and I have already purchased another pail to do the underside of a snowmobile trailer

I have used Undercoating in can on multiple trucks and car I’m very happy with the look and Pennsylvania winter roads are very hard on vehicles and it’s held up great

I have a 2001 olds that I'm determined to keep pristine. Every fall I power wash and clean the undercarriage because that's where the battle against rust starts and I can't fix what's rusted away. This spray goes on more evenly than paint cans and I know since its wax based it's going to seal salt out effectively. This is my 4th year with this undercoating and I've been impressed with how well it performs. The salt spray they put on the roads here will eat an older car in one season, but my olds looks brand new, winter after winter. I don't mind re-applying once a year; in fact, I think its better because tar or paint hides blemishes that need attention. I spent a few hours cleaning the underside, then the next day, I coat everything thoroughly. It's easy to apply and not messy like paint or tar products. Undercoat in a can gets applied anywhere rust might form. It's great stuff.

spray undercoating goes on very easy and the clean up is easy too !!! very impressed with this product , first time user , I hope it last ! time will tell . West Virginia winter will test it . Thanks Tom Bailey