null

Tectyl 506G

Tectyl 506G
Tectyl

PRICE:
$47.00
SKU:
WEIGHT:
0.00 LBS


Tectyl 506G Translucent Wax-Based Rustproofing Compound for Long-Term Automotive Primed & Unprimed Steel Protection

Tectyl 506G is a premium solvent based, gelled, and oxidized petrolatum wax-like corrosion preventive cut back with mineral spirits formulated specifically to provide a high-quality, long-term protective film for automotive primed or unprimed steel.
The firm, flexible, and non-tacky film of solvent based Tectyl 506G offers exceptional resistance to abrasion, weathering, and corrosion on wood and steel substrates.

Tectyl 506G is thixotropic, meaning its uncured state has a gel-like consistency that becomes more fluid or ketchup-like in texture with mixing and agitation. This characteristic allows for significantly easier application, spreading, and flow during product handling.

This premium quality rust inhibitor will dry to a translucent, amber-colored wax-like film that effortlessly repels water, can self-heal, and retain film flexibility in lower temperatures.

Product Uses

  • Translucent Wax-like Rustproofing and Abrasion Resistant Compound providing superb long-term weathering and corrosion protection for both automotive primed and unprimed steel.
  • The Corrosion Inhibiting film’s non-tacky trait provides exceptional adhesiveness along with its durability and flexibility when applied to metal and wood substrates.
  • Effective protection of used transportation equipment with less than perfect substrates.

Product Performance:

  • When applied at the recommended wet film thickness (WFT) of 10-12 mils over the surface profile, it will deposit the recommended dry film thickness of 4-5 mils.
  • Dry to touch in 2-4 hours, weather resistant after 4 hours, and fully cured after 24 hours.
  • Covers 180 square ft. per gallon when applied at the recommended dry film thickness (DFT).
  • High Temperature Flow Point minimum of 300°F means no undercoating on your garage floor or driveway at elevated temperatures.
  • Can provide up to 2 years of protection on both metal and wood substrates at the recommended dry film thickness.

Application Equipment Recommendations: 

  • Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
  • Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.017" to .021" tip orifice size)
  • High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
  • Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
  • High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft. 

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.

There aren't any reviews yet. Write a Review.

The Dark Horse of the Petroleum Industry
Undercoating your Vehicle: Is It A Waste of Time and Money?
Now is the Time to Undercoat Your Vehicle
What is Rust (and how can you stop its reign of terror)?
Bizrate 2023 Platinum Seven Time Winner

Safety Data Sheet
Product Data Sheet
Trailer Application Points
Spray Equipment Recommendations

Due to these products being hazardous, an additional shipping charge of $25.00 is automatically added to smaller "Ground Shipments". If you can order any combination of products that makes your total cart weight over 150 lbs. (which is considered "Freight Shipment"), this additional fee is waived. This can equate to considerable savings on shipping.


Sunoco Race Fuels is offering a Free Drum Pump with the purchase of a 54 Gallon Drum of Sunoco E85-R 99 Octane Race Fuel.
To add the free drum pump, first add the '54 Gallon Drum' to the cart, then click the blue 'Add FREE Drum Pump' button.


By entering your amount in the “Quantity” field, the price will automatically reflect the bulk discount below.
// Sunoco Free Drum Pump GraphQL // Loop through products in the cart and use GraphQL to query sku